Application concentrations: The chemical is applied after using the pool, before changing the water. The product must be shaken thoroughly before use. Dissolve it beforehand in a bucket of water, then pour it into the pool water while the water circulation is running. Add 200 g of CLEAR SPA per 1,000 litres, then circulate the water for at least 5 minutes. Effect/waiting time: Leave it shut down for one hour to allow the chemical to take effect, then recirculate the water in the system for a short time. Then drain and flush the system with clean water. First aid: Immediately remove all clothing contaminated with the product. In many cases, the symptoms of poisoning only appear hours later, so medical observation is necessary for at least 48 hours after the accident. Do not remove the respirator until all contaminated clothing has been removed. In case of inhalation: Move the victim to fresh air, consult a doctor if the symptoms do not go away. In case of skin contact: Wash immediately with plenty of water and soap and rinse thoroughly. In case of eye contact: Immediately flush eyes with large amounts of water for a few minutes while stretching the eyelids to ensure complete flushing of the eye and all tissues of the eyelids. Consult a doctor later. In case of ingestion: Seek medical attention immediately. Let the injured person drink as much water as he can and take him to fresh air, if he continues to feel unwell, consult a doctor. Warning: Pay attention to safety when using biocides! Always read the label and user manual before use! The chemical must be used according to the instructions for use. The product can only be used for flushing the water circulation system of a massage pool. It cannot be used to treat bath water.
Content: biocidal active ingredient: sodium dichloroisocyanurate dihydrate 2% CAS: 51580-86-0
other ingredients: sodium carbonate 50% CAS: 497-19-8, sodium bicarbonate 48% CAS: 144-55-8
