HABNEX 0.5 L - antifoam

Application: Spray the antifoam on the foam that has formed and wait until the foam dissipates. If we did not achieve the desired effect, apply it to the remaining foam after a short time. We use only the necessary amount of chemicals, because in case of overdose, oil stains may appear on the surface of the water. Store in original packaging, in a cool, dry place, protected from sunlight. The generated waste water must not be discharged undiluted or directly into the ground water, surface water, or sewer network. Dosing ratio depending on foaming, add 10-100 ml of anti-foaming agent to 1 m3 of pool water, then wait until the agent is well mixed. Maximum dosage amount 100 ml/1 m3. After application, the pool can be used immediately. The product can also be used in community bathing water, if the concentration of any parameter in the water does not exceed the limit values ​​prescribed in Decree 37/1996 (X.18.) NM.

Warning: According to the classification, the mixture is not dangerous, but handle it with the same care as dangerous mixtures. Keep away from children.

Content: alpha-octadecyl-omega-hydroxy-polyglycol ether 1.5-1.7%