Application: Especially recommended for indoor pools, odorless, does not irritate the eyes. For the first time, 200 g of AQUALUX A and 300 ml of AQUALUX B for 10 m3 of water. For continuous dosing, 100 g of AQUALUX A per 10 m3 of water per week and 100 ml of AQUALUX B every two weeks. For massage and whirlpool pools, the chemical requirement corresponding to the volume must be calculated. In the case of AQUALUX A, dose more often and more than the calculated amount, preferably on a case-by-case basis. The use of an oxygen water analyzer is required, the recommended active oxygen level is 3.0-8.0 mg/l.
Warning sentence
H271: May cause fire or explosion; strongly oxidizing. H314: Causes severe burns and eye damage. H317: May cause an allergic skin reaction. H335: May cause respiratory irritation.
Precautionary statements:
P220: Keep/store away from clothing/combustible material. P261: Avoid breathing dust. P280: The use of protective gloves/protective clothing/eye protection/face protection is mandatory. P303+361+353: IF ON SKIN (or hair): Immediately remove/take off all contaminated clothing. The skin should be rinsed with water/shower. 304+340: IN CASE OF INHALATION: The affected person should be taken to fresh air and placed in a position of rest so that he can breathe easily. P305+P351+P338: In case of contact with eyes: Rinse carefully with water for several minutes. If applicable, removing contact lenses, if it can be easily solved. Continue rinsing.
Content: Potassium peroxo-monosulfate 99%, 100 g of product contains 99 g of biocidal material.
