Application: 1 bag for 3-5 m3 water, 2 bags for 5-8 m3 water, 3 bags for 8-12 m3 water, 4 bags for 12-16 m3 water, 5 bags for 16-20 m3 water need to be put in the pool water. Do not pour directly into the pool! When preparing a solution, always fill the container with water first, and then pour the solution evenly along the edge of the pool. It resists decay caused by sunlight and heat. Ideal chlorine content: 0.6-1.0 mg/l, ideal pH value: 7.2-7.6. A water analyzer is required to set the water chemistry parameters!
Warning phrases:
H271 May cause fire or explosion; strongly oxidizing.
H302 Harmful if swallowed. H314 Causes severe burns and eye damage.
H319 Causes serious eye irritation. H335 May cause respiratory irritation. H410 Very toxic to aquatic life, causes long-term damage.
EUH031 Contact with acid produces toxic gases
EUH206 Attention! Do not use with other products. Hazardous gases (chlorine) may be released.
Precautionary statements:
P220 Keep/store away from clothing/combustible material. P261 Avoid breathing dust. P280 The use of protective gloves/protective clothing/eye protection/face protection is mandatory. P301+P312 IF SWALLOWED: Call a POISON CENTER or doctor immediately if you feel unwell. P303+361+353 IF ON SKIN (or hair): Immediately remove/take off all contaminated clothing. The skin should be rinsed with water/shower. 304+340 - IN CASE OF INHALATION: The affected person should be taken to fresh air and placed in a position of rest so that he can breathe easily.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If applicable, removing contact lenses, if it can be easily solved. Continue rinsing.
P405 Store locked up. P501 Dispose of contents/container as waste in accordance with national regulations.
Contents: Sodium dichloroisocyanurate 50%, Potassium peroxomonosulfate 50%
100 g of product contains 50 g of sodium dichloroisocyanurate, 50 g of potassium peroxo monosulfate.
